- Other Roadway Products[1]
- Other Vehicle Equipment[1]
- Access Control System[7]
- Other Access Control Products[7]
- Other Service Equipment[6]
- Vending Machines[4]
- Access Control Card Reader[8]
- Parking Equipment[2]
- Traffic Barrier[1]
- Auto Sensors[1]
- Other Security & Protection Products[10]
- Instrument Parts & Accessories[1]
- Contact Person : Ms. zhou candy
- Company Name : Shenzhen Tenet Technology Co., Ltd.
- Tel : 0086-755-33019260-8053
- Fax : 0086-755-26419610
- Address : Guangdong,shenzhen,4C 2nd chaguang industrial park shahe west road
- Country/Region : China
- Zip : 518055
TLD-110 single loop detector
Technical Data
Supply voltage 230V AC , 115V AC, 24V DC/AC, 12V DC/AC
( See the label on the detector)
Voltage tolerance AC: +10% / -15%
Voltage tolerance DC: ±15%
Power Consumption: 4.5VA
Output relays: 240V/5A
Operating temperature: -20°C to +65°C
Storage temperature: -40°C to +85°C
Frequency range: 20 kHz to 170 kHz
Reaction time: 100ms
Signal holding time: Unlimited
Sensitivity: Adjustable in 3 increments
Loop inductance: Total loop plus connection wiring: 50μH to 1000μH.
Ideal is 100μH to 300μH
Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter
Size of Housing: 78x40x108 mm (L x W x H)
Frequency
To eliminate interference of two neighbouring wire loops or loop detectors, the frequency can be altered by DIP5 on the main board in the box.
Sensitivity
The response sensitivity can be set using the threestage switch on the front. The setting “L” corresponds to the lowest sensitivity. “M” is the medium sensitivity and “H” is the highest sensitivity.
After the sensitivity has been set, a reset and a calibration automatically takes place.
[Attention] If the detector isn’t working normally, you must check the loop and wiring at first, and then alter the frequency or the sensitivity.
TLD-110 single loop detector
