- Other Roadway Products[1]
- Other Vehicle Equipment[1]
- Access Control System[7]
- Other Access Control Products[7]
- Other Service Equipment[6]
- Vending Machines[4]
- Access Control Card Reader[8]
- Parking Equipment[2]
- Traffic Barrier[1]
- Auto Sensors[1]
- Other Security & Protection Products[10]
- Instrument Parts & Accessories[1]
- Contact Person : Ms. zhou candy
- Company Name : Shenzhen Tenet Technology Co., Ltd.
- Tel : 0086-755-33019260-8053
- Fax : 0086-755-26419610
- Address : Guangdong,shenzhen,4C 2nd chaguang industrial park shahe west road
- Country/Region : China
- Zip : 518055
TRF-100 Medium-Range ID card Reader
The TRF-100 is a low cost and high performance proximity reader for reading ID code from uem4100 compatible read-only tags. The TRF-100 reader features an extended reading range up to 1000mm.It is ideally suited to be applied in automatic parking system, personal identification, access control and production control systems etc.
Features
l High sensitivity and reliable performance;
l Built-in transceiver antenna for maximum performance;
l Maximum effective distance up to 1000mm;
l Less than 100ms decoding time;
l Low power dissipation with single power supply;
l Multiple output format optional
l Built-in buzzer;
l Built-in external LED control;
l Potted for environmental protection.
Specifications
l Power Requirements +12Volts linear regulated DC
l at 200mAtypical,250mA max.
l Interface Wigand or other optional
l Typical Maximum read Range Range 1000mm with ISO card
l In ideal conditions
l Frequency 125KHz typical
l Transponder Read Only
l Autio/visual Indication Buzzer output with external
LED control
Interface
Color | Description |
Red | +12VDC |
Black | GND |
Green | Datao |
White | Data1 |
Yellow | External LED control (Internal 2K pulled-up) |
Brown | Reserved |
Trouble Shooting
When powered on, the TRF-100 takes a self-test to ensure the best reading performance with the buzzer beeping continually. When the self-test ends, the buzzer will give out a long beep and the TRF-100 enter the normal working mode. If the buzzer continues beeping without spot for a long time, please turn off the power and check out the environment and power supply to ensure locating the CCR105 in a good working condition. In case of problems the following procedure should be followed:
Failure to finish self-test with the buzzer beeping continually or with a short reading distance
1) Turn off the power to the TRF-100;
2) Check the power input connections making sure that they are not reversed;
3) Check the power supply complying with the specification;
4) If the supply has a current limit, set this to 350mA;
5) Make sure to install the TRF-100 in a environment without large area conductors nearby or mounting on a conducive surface. In self-test state ,do not apply any tags in TRF-100’s functional area;
6) Try to change the installment of the TRF-100 to another place to check if the trouble still exists.
TRF-100 Medium-Range ID card Reader
